JACKET:
Embedded – made of 100% high tenacitysynthetic yarn circular woven
LINER AND COVER:
Nitrile/PVC – compound
Through-the-weave-extrusion-process" which forms a unified lining and cover in red, blue, black and yellow, additional colours on request
Minimum friction loss
Oil and chemical resistance and good protection against ozone and atmospheric weathering
Ribs on the surface of the hose for high abrasion resistance
Light ribless version also available
Temperature range from -35 C up to +100 C
APPROVALS:
BS 6391 : 1983 type lll
prEN 1924 class 4
M.E.D. 96/98/EC
See-Berufsgenossenschaft (S.B.G)
LIoyd's Register of Shipping
Institute of Industrial Technology (TNO)
APPLICATIONS:
Municipal fire brigadesIndustrial fire brigadesShips and offshoreRefineriesConstruction sitesGeneral industrial use
Eschbach
Eschbach
FIRE HOSE
Bristol fire hoses are designed for more stringent demands. The hose jacket is again made of a circular woven high tenacity polyester yarn, which if required, can also be offered as canvas fire Fire hose. For the inner lining a rubber sleeve is used, providing great flexibility and adhesion for single or double jackets. This hose is offered in red color polynothanic coating on the outside. On request the quality can be further enhanced providing an increase bursting pressure (Up to 150 bar) electro-conductivity with on electrical resistance below 10 Ohm and or an inner lining largely resistant against chemicals, oil and petrol.
Bristol fire hoses for professional fire brigades, oil field and heavy industry use. It's main distinct feature is it's all one construction of synthetic rubber with textile reinforcement meeting B.S 6391 type and 15636.88 type.
Standard roll length 100ft. or 75ft. other lengths to customer requirement can be supplied.
Each hose is tested to 21 bars (300 psi) unless foreign standards require more.
Designed and manufactured in compliance with B.S 5274: 1985
Feature
Highly Protected: The compound of the cover and its profit protects the hose from damage by abrasion, puncture or impact.
Chemical Resistance: Bristol fire hose is manufactured to resist contact with a wide range of chemical products: oil, hydrocarbons, alkalis, salt water etc.
Weather Resistance: Outstanding performance at extreme temperature (-20 C+ 50 ) protected against atmospheric weathering.
Strong: High longitudinal tensile stands the passage of heavy vehicles. Very resistant to cuts and punctures. Resists continual flexing throughout its service life conserving its original built in strength.
Easily Cleaned: A quick wipe down is sufficient to keep away dirt on grit. If necessary it can be jet washed with detergent to remove chemicals etc.
No Drying: No need to dry the hose. Bristol fire hose is mildew, rust proof and water proof. Water absorption is negligible. Just clean and coil and the hose is ready for service again.
| استانداردها |
EN1-352 |
| مشخصات |
NRR:29dB
نگهدارنـده پلاستیــکی سبک با روکش فوم
فوم نرم برای راحتی بیشتر گوش |
| مدل ها |
بالای سر |
| استانداردها |
ANSI S1974 - 3.19/CSA Z94.2 |
| مشخصات |
نگهدارنده استنل استیل با روکش فوم جهت راحتی بیشتر
فوم نرم برای راحتی بیشتر گوش |
| مدل ها |
بالای سر، پشت گردنی، قابل نصب بر روی کلاه ایمنـی |
| استانداردها |
ANSI S1974 - 3.19/CSA Z94.2 |
| مشخصات |
نگهدارنده استنل استیل با روکش فوم جهت راحتی بیشتر
فوم نرم برای راحتی بیشتر گوش |
| مدل ها |
بالای سر، قابل نصب بر روی کلاه ایمنـی |
